Downloading...
 
product-image
 

500mA Output 78 series Regulators Surface mount type_BA178M24FP

ROHM的3端子稳压器的输出电压固定,有5V、6V、7V、8V、9V、10V、12V、15V、18V、20V、24V共11种;电流容量也有0.5A、1A两种,再与不同封装形式相组合,就形成丰富的产品阵容。也有与其他公司的3端子稳压器引脚兼容的产品,这种系列产品可用于各种装置中构成电源电路。而且,关于各种保护电路,内置了过流保护/过压保护/安全工作区限制电路等,实现了高可靠性。

* 本产品是标准级的产品。本产品不建议使用的车载设备。
型号
Status
封装
包装数量
最小独立包装数量
包装形态
RoHS
BA178M24FP-E2 供应中 TO252-3 2000 2000 Taping Yes
 
特性:
Grade Standard
Breakdown Voltage(Max.)[V] 35.0
ch 1
Vin(Min.)[V] 27.0
Vin(Max.)[V] 33.0
Vout (Typ.) [V] 24
Vout Precision ±4.0%
Iout(Max.)[A] 0.5
Circuit Current[mA] 4.5
Shutdown Function No
Thermal Shut-down Yes
Over Current Protection Yes
Over Voltage Protection No
Discharge Function No
Soft Start No
Additional Feature ASO(Area of Safe Operation)
Operating Temperature (Min.)[°C] -40
Operating Temperature (Max.)[°C] 85
特点:
  • ・内置有过流保护电路、过热关断电路
    ・纹波抑制特性好
    ・封装采用TO220CP-3和TO252-3两种形式,应用范围广
 
 
引脚配置图:
Pin Configration
 
 
相关产品
相关新产品/产品更新电源管理
PART NUMBER Product Name Package Datasheet Distribution Inventory
BA178M05FP 500mA Output 78 series Regulators Surface mount type TO252-3 - 购买
BA178M06FP 500mA Output 78 series Regulators Surface mount type TO252-3 - 购买
BA178M07FP 500mA Output 78 series Regulators Surface mount type TO252-3 - 购买
BA178M08FP 500mA Output 78 series Regulators Surface mount type TO252-3 - 购买
BA178M09FP 500mA Output 78 series Regulators Surface mount type TO252-3 - 购买
BA178M10FP 500mA Output 78 series Regulators Surface mount type TO252-3 - 购买
New Products:
 
 
技术信息
Table of resistance for output voltage setting on linear regulator Ics

This application notes provide tables for each series so that it is easy to set the resistance value for the output voltage setting from various internal reference voltages VREF.

Thermal Resistance

The definition and how to use thermal resistance and thermal characterization parameter of packages for ROHM’s integrated circuit are described in this application note.

BA178xx, BA178Mxx Series PCB Layout

The basic terminal configuration of a linear regulator IC consists of four parts: input, output, GND, and feedback…

Basics of Linear Regulators

A linear regulator, also referred to as a "three-terminal regulator" or "dropper," is a power supply long known to many designers owning to its simple circuitry and ease of use...

Linear Regulator Specifications

Very important information such as maximum ratings, operating conditions and characteristic graphs are described in the table.

Reverse Voltage Protection

A linear regulator integrated circuit (IC) is a DC-to-DC buck converter system that reduces a DC supply from higher voltage level to a lower voltage level...

Simple Test Method for Estimating the Stability of Linear Regulators

Low drop-out (LDO) regulators developed back in the age when large-capacitance multi-layer ceramic capacitors (hereinafter, MLCCs) were uncommon cause a phase delay, leading to oscillation when connected to a low-ESR capacitor like an MLCC...

Thermal Calculation for Linear Regulator

The loss in linear regulators increases as the difference between the input and output voltages increases. Since most of the loss is converted to heat, a very large amount of heat may be generated in some conditions...

Power Source ON/OFF Characteristics for Linear Regulator

When a linear regulator IC is turned ON, the electric charge is stored in the output capacitor and the output voltage increases up to the specified value.

BAxxCC0 Series Circuit Using a Ceramic Output Capacitor

This application note proposes a circuit using an output ceramic capacitor that allows a stable phase compensation.

Measurement Method for Phase Margin with Frequency Response Analyzer (FRA)

This application note introduces a method for easily measuring the phase margin with a Frequency Response Analyzer (FRA) made by NF Corporation.

Connecting LDOs in Parallel

Provides some hints on how to connect LDOs in parallel.