1.5A Variable/Fixed Output LDO Regulators_BA18JC5TROHM的二次LDO稳压器系列能够使正在追求小型化、节能化的各种装置最大限度地发挥其性能,构成低噪声而又稳定工作的电源电路。用于局部电源的1.5A固定输出二次LDO稳压器系列,是输出电压精度为±1%,最大可提供1.5A输出电流的低饱和型稳压器。利用多种输出电压、输出电压是否可调(ADJ)及1.5V~12V的输出电压相互组合,形成了类型丰富的产品阵容。可广泛应用于TV、HDD、PC、DVD等等。本系列产品内置有防止输出短路等原因损毁IC的过流保护电路、防止过负荷状态等产生的热破坏IC的温度保护电路。
| ||||
* 本产品是标准级的产品。本产品不建议使用的车载设备。 |
Grade | Standard |
Breakdown Voltage(Max.)[V] | 18.0 |
ch | 1 |
Vin(Min.)[V] | 3.0 |
Vin(Max.)[V] | 16.0 |
Vout (Typ.) [V] | 1.8 |
Vout Precision | ±1.0 |
Iout(Max.)[A] | 1.5 |
Circuit Current[mA] | 0.5 |
Shutdown Function | No |
Thermal Shut-down | Yes |
Over Current Protection | Yes |
Over Voltage Protection | No |
Discharge Function | No |
Soft Start | No |
I/O Voltage Difference (Typ.)[V] | 0.3(Io=0.5A) |
Ripple Rejection [dB] | 55.0 |
Load Regulation[mV] | 5(Io=5mA to 1.5A) |
Input Capacitor[µF] | 0.33 |
Output Capacitor[µF] | 22.0 |
Operating Temperature (Min.)[°C] | -40 |
Operating Temperature (Max.)[°C] | 105 |
![]() |
PART NUMBER | Product Name | Package | Datasheet | Distribution Inventory |
---|---|---|---|---|
BA25JC5T | 1.5A Variable/Fixed Output LDO Regulators | TO220FP-3 | 购买 | |
BA15JC5T | 1.5A Variable/Fixed Output LDO Regulators | TO220FP-3 | 购买 | |
BA30JC5T | 1.5A Variable/Fixed Output LDO Regulators | TO220FP-3 | 咨询 | |
BA33JC5T | 1.5A Variable/Fixed Output LDO Regulators | TO220FP-3 | 购买 | |
BA50JC5T | 1.5A Variable/Fixed Output LDO Regulators | TO220FP-3 | 购买 | |
BA60JC5T | 1.5A Variable/Fixed Output LDO Regulators | TO220FP-3 | 咨询 |
This application notes provide tables for each series so that it is easy to set the resistance value for the output voltage setting from various internal reference voltages VREF.
The definition and how to use thermal resistance and thermal characterization parameter of packages for ROHM’s integrated circuit are described in this application note.
The basic terminal configuration of a linear regulator IC consists of four parts: input, output, GND, and feedback…
A linear regulator, also referred to as a "three-terminal regulator" or "dropper," is a power supply long known to many designers owning to its simple circuitry and ease of use...
Very important information such as maximum ratings, operating conditions and characteristic graphs are described in the table.
A linear regulator integrated circuit (IC) is a DC-to-DC buck converter system that reduces a DC supply from higher voltage level to a lower voltage level...
Three terminal regulators provide a simple, effective, and stable solution to power voltage regulation requirements. Some applications, however, require special techniques to deal with concerns about overheating...
Low drop-out (LDO) regulators developed back in the age when large-capacitance multi-layer ceramic capacitors (hereinafter, MLCCs) were uncommon cause a phase delay, leading to oscillation when connected to a low-ESR capacitor like an MLCC...
The loss in linear regulators increases as the difference between the input and output voltages increases. Since most of the loss is converted to heat, a very large amount of heat may be generated in some conditions...
When a linear regulator IC is turned ON, the electric charge is stored in the output capacitor and the output voltage increases up to the specified value.
This application note proposes a circuit using an output ceramic capacitor that allows a stable phase compensation.
This application note introduces a method for easily measuring the phase margin with a Frequency Response Analyzer (FRA) made by NF Corporation.
Provides some hints on how to connect LDOs in parallel.
For ICs