BD3533F是适用于JEDEC标准DDR-SDRAM的终端稳压器。内置N-MOSFET,漏型/源型最大可提供1A电流的线性电源。内部的OP-AMP采用高速设计,实现了优异的瞬态响应特性。为驱动内部的N-MOSFET,需要3.3V或5.0V偏压电源。为确保JEDEC规定的电压精度,本产品拥有独立的基准输入引脚(VDDQ)和独立的反馈引脚(VTTS),实现了优异的输出电压精度和负载调整率。还有DDR-SDRAM、存储器控制器用基准电源输出引脚(VREF)。EN引脚=L时,VTT输出为Hi-Z,并保持VREF输出,对应DDR-SDRAM的Self Refresh状态。

* 本产品是标准级的产品。本产品不建议使用的车载设备。
BD3533F-E2 供应中 SOP8 2500 2500 Taping Yes
Grade Standard
ch 1
Vin(Min.)[V] 2.7
Vin(Max.)[V] 5.5
Vout (Typ.) [V] 0.75 to 1.25
Iout(Max.)[A] 3.0
Thermal Shut-down Yes
Under Voltage Lock Out Yes
Operating Temperature (Min.)[°C] -20
Operating Temperature (Max.)[°C] 100
  • · Incorporates a Push-Pull Power Supply for Termination (VTT)
    · Incorporates a Reference Voltage Circuit (VREF)
    · Incorporates an Enabler
    · Incorporates an Under Voltage Lockout (UVLO)
    · Incorporates a Thermal Shutdown Protector (TSD)
    · Compatible with Dual Channel (DDR-2)
PART NUMBER Product Name Package Datasheet Distribution Inventory
BD3531F DDR-SDRAM用终端用线性电源 SOP8   购买
BD3532F DDR-SDRAM用终端用线性电源 SOP8   购买
BD3537F DDR-SDRAM用终端用线性电源 SOP8   购买
BD3538F DDR-SDRAM用终端用线性电源 SOP8   购买
BD3538HFN DDR-SDRAM用终端用线性电源 HSON8   购买
BD35395FJ-M 面向DDR-SDRAM的终端用线性电源 SOP-J8   购买
New Products:
Thermal Resistance

The definition and how to use thermal resistance and thermal characterization parameter of packages for ROHM’s integrated circuit are described in this application note.

Basics of Linear Regulators

A linear regulator, also referred to as a "three-terminal regulator" or "dropper," is a power supply long known to many designers owning to its simple circuitry and ease of use...

Linear Regulator Specifications

Very important information such as maximum ratings, operating conditions and characteristic graphs are described in the table.

Reverse Voltage Protection

A linear regulator integrated circuit (IC) is a DC-to-DC buck converter system that reduces a DC supply from higher voltage level to a lower voltage level...

Simple Test Method for Estimating the Stability of Linear Regulators

Low drop-out (LDO) regulators developed back in the age when large-capacitance multi-layer ceramic capacitors (hereinafter, MLCCs) were uncommon cause a phase delay, leading to oscillation when connected to a low-ESR capacitor like an MLCC...

Thermal Calculation for Linear Regulator

The loss in linear regulators increases as the difference between the input and output voltages increases. Since most of the loss is converted to heat, a very large amount of heat may be generated in some conditions...

Power Source ON/OFF Characteristics for Linear Regulator

When a linear regulator IC is turned ON, the electric charge is stored in the output capacitor and the output voltage increases up to the specified value.

BAxxCC0 Series Circuit Using a Ceramic Output Capacitor

This application note proposes a circuit using an output ceramic capacitor that allows a stable phase compensation.

Measurement Method for Phase Margin with Frequency Response Analyzer (FRA)

This application note introduces a method for easily measuring the phase margin with a Frequency Response Analyzer (FRA) made by NF Corporation.

Connecting LDOs in Parallel

Provides some hints on how to connect LDOs in parallel.