50mA 输出电压跟踪_BD42500G-CBD42500G-C是45V耐压、偏置电压 ±15mV、输出电流50mA、消耗电流40µA的低待机电流电压跟踪器。本IC最适合用来降低蓄电池直连系统的消耗电流。输出相位补偿电容器可使用陶瓷电容器。本IC内置防止因输出短路等发生IC破坏的过电流保护、以及防止因过负荷状态等使IC发生热破坏的过热保护电路。
| ||||
| Grade | Automotive |
| ch | 1 |
| Vin(Min.)[V] | 3.0 |
| Vin(Max.)[V] | 42.0 |
| Iout(Max.)[A] | 0.05 |
| Circuit Current[mA] | 0.04 |
| Thermal Shut-down | Yes |
| Over Current Protection | Yes |
- AEC-Q100 Qualified
- Qualified for Automotive Applications
- Wide Temperature Range (Tj) : -40 °C to +150 °C
- Wide Operating Input Range: 3V to 42V
- Low Quiescent Current: 40µA (Typ)
- Output Voltage Tracking Accuracy: ±15mV
- Over Current Protection (OCP)
- Thermal Shutdown Protection (TSD)
| PART NUMBER | Product Name | Package | Datasheet | Distribution Inventory |
|---|---|---|---|---|
| BD42530FPJ-C | 250mA 输出 电压跟踪器 | TO252-J5 | 购买 | |
| BD42540FJ-C | 70mA 输出电压跟踪 | SOP-J8 | 购买 | |
| BD42530EFJ-C | 250mA 输出 电压跟踪器 | HTSOP-J8 | 购买 | |
| BD42530FP2-C | 250mA 输出 电压跟踪器 | TO263-5 | 购买 | |
| BD3925FP-C | Automotive 500mA Voltage Tracker | TO252-5 | 购买 | |
| BD3925HFP-C | Automotive 500mA Voltage Tracker | HRP5 | 购买 |
The definition and how to use thermal resistance and thermal characterization parameter of packages for ROHM’s integrated circuit are described in this application note.
A linear regulator, also referred to as a "three-terminal regulator" or "dropper," is a power supply long known to many designers owning to its simple circuitry and ease of use...
Very important information such as maximum ratings, operating conditions and characteristic graphs are described in the table.
A linear regulator integrated circuit (IC) is a DC-to-DC buck converter system that reduces a DC supply from higher voltage level to a lower voltage level...
Low drop-out (LDO) regulators developed back in the age when large-capacitance multi-layer ceramic capacitors (hereinafter, MLCCs) were uncommon cause a phase delay, leading to oscillation when connected to a low-ESR capacitor like an MLCC...
The loss in linear regulators increases as the difference between the input and output voltages increases. Since most of the loss is converted to heat, a very large amount of heat may be generated in some conditions...
When a linear regulator IC is turned ON, the electric charge is stored in the output capacitor and the output voltage increases up to the specified value.
This application note proposes a circuit using an output ceramic capacitor that allows a stable phase compensation.
This application note introduces a method for easily measuring the phase margin with a Frequency Response Analyzer (FRA) made by NF Corporation.
Provides some hints on how to connect LDOs in parallel.
For ICs