带看门狗计时器复位 550mA LDO稳压器_BD4271FP2-C

BD4271FP2-C是45V高耐压稳压器,内置监视其输出的复位电路(RESET)及看门狗计时器(WDT) 。输出电流能力550mA,但待机电流很低,适合用来降低系统的消耗电流。有对输出进行ON/OFF的CTL引脚,将CTL设为L可关闭输出,且能减少电流消耗。稳压器输出低于4.65V(Typ)时输出复位信号。复位信号的复位延迟时间、看门狗计时器监视时间可通过外接电容器进行调整。

BD4271FP2-CE2 供应中 TO263-7 500 500 Taping Yes
Grade Automotive
ch 1
Vin(Min.)[V] 5.5
Vin(Max.)[V] 45.0
Vout (Typ.) [V] 5
Vout Precision ±2.0%
Iout(Max.)[A] 0.55
Circuit Current[mA] 0.075
Shutdown Function No
Thermal Shut-down Yes
Over Current Protection Yes
Under Voltage Lock Out Yes
I/O Voltage Difference (Typ.)[V] 0.2(Io=300mA)
Ripple Rejection [dB] 60.0
Load Regulation[mV] 10
Operating Temperature (Min.)[°C] -40
Operating Temperature (Max.)[°C] 150
    • AEC-Q100 qualified
    • Low ESR ceramic capacitors applicable for output
    • Low drop voltage: PDMOS output transistor
    • Power on and under-voltage reset
    • Programmable reset delay and watchdog time by external capacitor
    • Enable input
    • Over Current Protection (OCP)
    • Thermal Shut Down (TSD)
PART NUMBER Product Name Package Datasheet Distribution Inventory
BD3020HFP 500mA LDO稳压器+看门狗计时器复位 HRP7   购买
BD3021HFP 500mA LDO稳压器+看门狗计时器复位 HRP7   咨询
BD4271HFP-C 带看门狗计时器复位 550mA LDO稳压器 HRP7   购买
New Products:
Thermal Resistance

The definition and how to use thermal resistance and thermal characterization parameter of packages for ROHM’s integrated circuit are described in this application note.

Basics of Linear Regulators

A linear regulator, also referred to as a "three-terminal regulator" or "dropper," is a power supply long known to many designers owning to its simple circuitry and ease of use...

Linear Regulator Specifications

Very important information such as maximum ratings, operating conditions and characteristic graphs are described in the table.

Reverse Voltage Protection

A linear regulator integrated circuit (IC) is a DC-to-DC buck converter system that reduces a DC supply from higher voltage level to a lower voltage level...

Simple Test Method for Estimating the Stability of Linear Regulators

Low drop-out (LDO) regulators developed back in the age when large-capacitance multi-layer ceramic capacitors (hereinafter, MLCCs) were uncommon cause a phase delay, leading to oscillation when connected to a low-ESR capacitor like an MLCC...

Thermal Calculation for Linear Regulator

The loss in linear regulators increases as the difference between the input and output voltages increases. Since most of the loss is converted to heat, a very large amount of heat may be generated in some conditions...

Power Source ON/OFF Characteristics for Linear Regulator

When a linear regulator IC is turned ON, the electric charge is stored in the output capacitor and the output voltage increases up to the specified value.

BAxxCC0 Series Circuit Using a Ceramic Output Capacitor

This application note proposes a circuit using an output ceramic capacitor that allows a stable phase compensation.

Measurement Method for Phase Margin with Frequency Response Analyzer (FRA)

This application note introduces a method for easily measuring the phase margin with a Frequency Response Analyzer (FRA) made by NF Corporation.

Connecting LDOs in Parallel

Provides some hints on how to connect LDOs in parallel.