Downloading...
 
product-image
 

500 mA LDO稳压器 + 电压检测器_BD4275FP2-C

BD4275FP2-C是45V高耐压稳压器,内置有监视其输出的复位电路。输出电流能力500mA,但待机电流很低,适合用来降低系统的消耗电流。稳压器输出低于4.62 V (Typ)时输出复位信号。复位信号的复位延迟时间可通过外接电容器进行调整。

型号
Status
封装
包装数量
最小独立包装数量
包装形态
RoHS
BD4275FP2-CE2 供应中 TO263-5F 500 500 Taping Yes
 
特性:
Grade Automotive
Breakdown Voltage(Max.)[V] 45.0
ch 1
Vin(Min.)[V] 5.5
Vin(Max.)[V] 45.0
Vout (Typ.) [V] 5
Vout Precision ±2.0%
Iout(Max.)[A] 0.5
Circuit Current[mA] 0.065
Shutdown Function No
Thermal Shut-down Yes
Over Current Protection Yes
I/O Voltage Difference (Typ.)[V] 0.25(Io=300mA)
Ripple Rejection [dB] 60.0
Operating Temperature (Min.)[°C] -40
Operating Temperature (Max.)[°C] 150
特点:
  • ·AEC-Q100 Qualified.
    ·Low ESR ceramic capacitors applicable for output.
    ·Low drop voltage: PDMOS output transistor
    ·Power on and under-voltage reset
    ·Programmable reset delay time by external capacitor.
 
 
应用:
引脚配置图:
Pin Configration
 
 
相关产品
相关新产品/产品更新电源管理
PART NUMBER Product Name Package Datasheet Distribution Inventory
BD42754FPJ-C 500mA Output LDO Regulatorwith Voltage Detector TO252-J5   购买
BD42754FP2-C 500mA LDO稳压器+电压检测器 TO263-5F   购买
BD4269EFJ-C 300mA LDO稳压器 + 2ch RESET HTSOP-J8   购买
BD4269FJ-C 200mA LDO稳压器 + 2ch RESET SOP-J8   购买
BD4275FPJ-C 500 mA LDO稳压器 + 电压检测器 TO252-J5F   咨询
New Products:
 
 
技术信息
Thermal Resistance

The definition and how to use thermal resistance and thermal characterization parameter of packages for ROHM’s integrated circuit are described in this application note.

Basics of Linear Regulators

A linear regulator, also referred to as a "three-terminal regulator" or "dropper," is a power supply long known to many designers owning to its simple circuitry and ease of use...

Linear Regulator Specifications

Very important information such as maximum ratings, operating conditions and characteristic graphs are described in the table.

Reverse Voltage Protection

A linear regulator integrated circuit (IC) is a DC-to-DC buck converter system that reduces a DC supply from higher voltage level to a lower voltage level...

Simple Test Method for Estimating the Stability of Linear Regulators

Low drop-out (LDO) regulators developed back in the age when large-capacitance multi-layer ceramic capacitors (hereinafter, MLCCs) were uncommon cause a phase delay, leading to oscillation when connected to a low-ESR capacitor like an MLCC...

Thermal Calculation for Linear Regulator

The loss in linear regulators increases as the difference between the input and output voltages increases. Since most of the loss is converted to heat, a very large amount of heat may be generated in some conditions...

Power Source ON/OFF Characteristics for Linear Regulator

When a linear regulator IC is turned ON, the electric charge is stored in the output capacitor and the output voltage increases up to the specified value.

BAxxCC0 Series Circuit Using a Ceramic Output Capacitor

This application note proposes a circuit using an output ceramic capacitor that allows a stable phase compensation.

Measurement Method for Phase Margin with Frequency Response Analyzer (FRA)

This application note introduces a method for easily measuring the phase margin with a Frequency Response Analyzer (FRA) made by NF Corporation.

Connecting LDOs in Parallel

Provides some hints on how to connect LDOs in parallel.