2.7-5.5V 3A 1ch Buck converter_BD9132MUVROHM的高效率降压开关稳压器BD9132MUV是从5.5V/3.3V以下的电源线产生0.8V低电压的电源。通过ROHM独特的脉冲跳跃方式和同步整流电路实现高效率化,采用电流模式控制,实现负荷急变时的高速过渡响应。
| ||||
* 本产品是标准级的产品。本产品不建议使用的车载设备。 |
型号 | Status | 封装 | 包装数量 | 最小独立包装数量 | 包装形态 | RoHS |
---|---|---|---|---|---|---|
BD9132MUV-E2 | 供应中 | VQFN020V4040 | 2500 | 2500 | Taping | Yes |
Grade | Standard |
ch | 1 |
Integrated FET / Controller | Integrated FET |
Buck / Boost / Buck-Boost / Inverting | Buck |
Synchronous / Nonsynchronous | Synchronous |
Vin1(Min.)[V] | 2.7 |
Vin1(Max.)[V] | 5.5 |
Vout1(Min.)[V] | 0.8 |
Vout1(Max.)[V] | 3.3 |
Iout1(Max.)[A] | 3.0 |
SW frequency(Max.)[MHz] | 1.0 |
Light Load mode | Yes |
EN | Yes |
PGOOD | No |
Operating Temperature (Min.)[°C] | -40 |
Operating Temperature (Max.)[°C] | 105 |
- ・1ch开关稳压器
・通过电流模式PWM制御方式实现高速过渡应答
・通过内置同步整流(Nch/Pch FET)、SLLM™ (Simple Light Load Mode),在全负荷领域实现高效率
・内置软启功能
・内置温度/UVLO保护功能
・内置定时锁定式短路保护功能
・内置关闭功能Icc=0μA(Typ.)
![]() |
PART NUMBER | Product Name | Package | Datasheet | Distribution Inventory |
---|---|---|---|---|
BD9S300MUF-C | 2.7V to 5.5V Input, 3A Integrated MOSFET Single Synchronous Buck DC/DC Converter For Automotive | VQFN16FV3030 | 咨询 | |
BD9E104FJ | 7.0 V to 26.0 V Input, 1 A Integrated MOSFET Single Synchronous Buck DC/DC Converter | SOP-J8 | 咨询 | |
BD9V101MUF-LB | 16V to 60V, 1A 1ch 2.1MHz Synchronous Buck Converter Integrated FET | VQFN24FV4040 | 购买 | |
BD70522GUL | Nano Energy™ - Ultra Low Iq Buck Converter For Low Power Applications | VCSP50L1C | 购买 | |
BD9E103FJ | 7V to 28V Input, 1.5A Integrated MOSFET Single Synchronous Buck DC/DC Converter | SOP-J8 | 购买 | |
BD9S400MUF-C | 2.7V to 5.5V Input, 4A Integrated MOSFET Single Synchronous Buck DC/DC Converter For Automotive | VQFN16FV3030 | 购买 |
This application note explains the calculation of external capacitor value for buck converter IC circuit.
This application note covers the steps required in choosing the inductor and to calculate the value used in buck regulator IC circuits.
This Application Note offers reference table to easily set resistor values for output voltage with various internal reference voltages VREF.
The definition and how to use thermal resistance and thermal characterization parameter of packages for ROHM’s integrated circuit are described in this application note.
Major problems that arise from in appropriate layout may cause increase in noise superposed by output and switching signal, the deterioration of regulator, and also lack of stability...
Using unmatched MLCC may not obtain required target characteristics for power supply circuit and may cause abnormal operation. This application note explains the important points while using MLCC.
This application note describes how to obtain the power loss required to calculate the temperature of a semiconductor device. Temperature control is important to ensuring product reliability.
The definition and how to use thermal resistance and thermal characterization parameter of packages for ROHM’s integrated circuit are described in this application note.
This application note explains the features and things to consider when shopping for power inductors.
In buck converter ICs, many high-frequency noises are generated at switch nodes. A snubber circuit provides one way of eliminating such harmonic noise. This application note explains how to set up the RC snubber circuits.
This application note explains power loss factors and methods for calculating them. It also explains how the relative importance of power loss factors depends on the specifications of the switching power source.
This application note introduces a method for easily measuring the phase margin with a Frequency Response Analyzer (FRA) made by NF Corporation.
For ICs