Downloading...
 
product-image
 

Single-output Step-up, Negative Voltage, Step-down Switching Regulators (Controller type)_BD9300FV

BD9300FV是输出集电极开路的1chDC/DC转换器。可构成升压・降压・反转等任意DC/DC转换器,输入电压范围广(3.6V to 35V),可用于各种用途。

* 本产品是标准级的产品。本产品不建议使用的车载设备。
型号
Status
封装
包装数量
最小独立包装数量
包装形态
RoHS
BD9300FV-E2 供应中 SSOP-B14 2500 2500 Taping Yes
 
特性:
Grade Standard
ch 1
Integrated FET / Controller Controller
Buck / Boost / Buck-Boost / Inverting Buck / Boost / Inverting
Synchronous / Nonsynchronous Nonsynchronous
Vin1(Min.)[V] 3.6
Vin1(Max.)[V] 35.0
Iout1(Max.)[A] 0.03
SW frequency(Max.)[MHz] 0.8
Light Load mode No
EN No
PGOOD No
Operating Temperature (Min.)[°C] -40
Operating Temperature (Max.)[°C] 85
特点:
  • ・输出集电极开路的1chDC/DC转换器
    ・输入电压范围广(3.6V to 35V)
 
 
引脚配置图:
Pin Configration
 
 
相关产品
相关新产品/产品更新电源管理
PART NUMBER Product Name Package Datasheet Distribution Inventory
BD9300F Single-output Step-up, Negative Voltage, Step-down Switching Regulators (Controller type) SOP14   购买
New Products:
 
 
技术信息
Thermal Resistance

The definition and how to use thermal resistance and thermal characterization parameter of packages for ROHM’s integrated circuit are described in this application note.

Calculation of Power Loss (Synchronous)

This application note describes how to obtain the power loss required to calculate the temperature of a semiconductor device. Temperature control is important to ensuring product reliability.

Thermal Resistance

The definition and how to use thermal resistance and thermal characterization parameter of packages for ROHM’s integrated circuit are described in this application note.

Measurement Method for Phase Margin with Frequency Response Analyzer (FRA)

This application note introduces a method for easily measuring the phase margin with a Frequency Response Analyzer (FRA) made by NF Corporation.

Resistor Value Table to set Output Voltage of Buck Converter IC

This Application Note offers reference table to easily set resistor values for output voltage with various internal reference voltages VREF.

PCB Layout Techniques of Buck Converter

Major problems that arise from in appropriate layout may cause increase in noise superposed by output and switching signal, the deterioration of regulator, and also lack of stability...

Snubber Circuit for Buck Converter IC

In buck converter ICs, many high-frequency noises are generated at switch nodes. A snubber circuit provides one way of eliminating such harmonic noise. This application note explains how to set up the RC snubber circuits.

Capacitor Calculation for Buck converter IC

This application note explains the calculation of external capacitor value for buck converter IC circuit.

Inductor Calculation for Buck converter IC

This application note covers the steps required in choosing the inductor and to calculate the value used in buck regulator IC circuits.

Efficiency of Buck Converter

This application note explains power loss factors and methods for calculating them. It also explains how the relative importance of power loss factors depends on the specifications of the switching power source.

The Important Points of Multi-layer Ceramic Capacitor Used in Buck Converter circuit

Using unmatched MLCC may not obtain required target characteristics for power supply circuit and may cause abnormal operation. This application note explains the important points while using MLCC.

Considerations for Power Inductors Used for Buck Converters

This application note explains the features and things to consider when shopping for power inductors.