Downloading...
 
product-image
 

5V output Low Iq DC/DC Converters_BD99011EFV-M

BD99011EFV-M是内置5V输出的POWER MOSFET的低待机电流降压DC/DC转换器。除了在重负载时保持调整的输出电压并实现高效率外,通过SLLM™(Simple Light Load Mode),在轻负载时也可实现低消耗电流和高效率。本IC符合车载规格,可对应42V的绝对最大额定值。为了保持冷启动时的输出,最小工作电压为3.6V。此外,通过电流模式控制,可实现快速瞬态响应和轻松的相位补偿。
BD99011EFV-M可通过HTSSOP-B24封装和几个外接元件,实现紧凑的PCB设计。

型号
Status
封装
包装数量
最小独立包装数量
包装形态
RoHS
BD99011EFV-ME2 供应中 HTSSOP-B24 2000 2000 Taping Yes
 
特性:
Grade Automotive
ch 1
Integrated FET / Controller Integrated FET
Buck / Boost / Buck-Boost / Inverting Buck
Synchronous / Nonsynchronous Synchronous
Vin1(Min.)[V] 3.6
Vin1(Max.)[V] 35.0
Vout1(Min.)[V] 4.9
Vout1(Max.)[V] 5.1
Iout1(Max.)[A] 2.0
SW frequency(Max.)[MHz] 0.5
Light Load mode Yes
EN Yes
PGOOD No
Operating Temperature (Min.)[°C] -40
Operating Temperature (Max.)[°C] 105
特点:
    • Low Quiescent Operating Current: 22uA
    • Simple Light Load Mode (SLLM)
    • Supports Cold Cranking Down to 3.6V
    • Output Voltage Accuracy: ±2%
    • Synchronous Rectifier
    • Soft Start
    • Chip Enable pin compatible with CMOS logic and battery voltages
    • Forced PMW Mode Function
    • Current Mode Control with External Compensation Circuit
    • Over Current Protection, Short Circuit Protection, Over Voltage Protection for VOUT, Under Voltage Lock Out for VIN and Thermal Protection Circuits
 
 
相关产品
相关新产品/产品更新电源管理
PART NUMBER Product Name Package Datasheet Distribution Inventory
BD99010EFV-M 3.3V output Low Iq DC/DC Converters HTSSOP-B24   购买
New Products:
 
 
技术信息
Capacitor Calculation for Buck converter IC

This application note explains the calculation of external capacitor value for buck converter IC circuit.

Inductor Calculation for Buck converter IC

This application note covers the steps required in choosing the inductor and to calculate the value used in buck regulator IC circuits.

Resistor Value Table to set Output Voltage of Buck Converter IC

This Application Note offers reference table to easily set resistor values for output voltage with various internal reference voltages VREF.

Thermal Resistance

The definition and how to use thermal resistance and thermal characterization parameter of packages for ROHM’s integrated circuit are described in this application note.

PCB Layout Techniques of Buck Converter

Major problems that arise from in appropriate layout may cause increase in noise superposed by output and switching signal, the deterioration of regulator, and also lack of stability...

The Important Points of Multi-layer Ceramic Capacitor Used in Buck Converter circuit

Using unmatched MLCC may not obtain required target characteristics for power supply circuit and may cause abnormal operation. This application note explains the important points while using MLCC.

Calculation of Power Loss (Synchronous)

This application note describes how to obtain the power loss required to calculate the temperature of a semiconductor device. Temperature control is important to ensuring product reliability.

Thermal Resistance

The definition and how to use thermal resistance and thermal characterization parameter of packages for ROHM’s integrated circuit are described in this application note.

Considerations for Power Inductors Used for Buck Converters

This application note explains the features and things to consider when shopping for power inductors.

Snubber Circuit for Buck Converter IC

In buck converter ICs, many high-frequency noises are generated at switch nodes. A snubber circuit provides one way of eliminating such harmonic noise. This application note explains how to set up the RC snubber circuits.

Efficiency of Buck Converter

This application note explains power loss factors and methods for calculating them. It also explains how the relative importance of power loss factors depends on the specifications of the switching power source.

Measurement Method for Phase Margin with Frequency Response Analyzer (FRA)

This application note introduces a method for easily measuring the phase margin with a Frequency Response Analyzer (FRA) made by NF Corporation.