BM2P139T1F (新产品)
PWM Type DC/DC Converter IC Built-in Switching MOSFET for Non-isolated Type
BM2P139T1F (新产品)
PWM Type DC/DC Converter IC Built-in Switching MOSFET for Non-isolated Type
The PWM type DC/DC converter for AC/DC, this IC provides an optimum system for all products that include an electrical outlet. It enables simpler design of a high effective converter specializing in non-isolated devices. This IC has a built-in starter circuit that tolerates 650V, and it contributes to low power consumption. With a current detection resistor as internal device, it can be designed as small power supply. Since current mode control is utilized, current is restricted in each cycle and excellent performance is demonstrated in bandwidth and transient response. The oscillation frequency is fixed to 100kHz. A frequency hopping function is also on chip, and it contributes to low EMI. In addition, a built-in super junction MOSFET which tolerates 650V makes the design easy.
本产品不建议使用于车载设备。
主要规格
特性：
FB OLP
Auto Restart
BR UVLO
No
External LATCH Function
No
AC Monitor Function
No
VH Terminal UVLO
No
Frequency Reduction Function
No
Current Detection Resistors
Integrated
Over Current Detection Current (typ.)[A]
0.45
Dynamic Over Current Detection
Yes
Feedback Voltage (typ.)[V]
13
FET
Super Junction MOSFET Integrated
Controller Type
PWM
Vin1(Min.)[V]
10.6
Vin1(Max.)[V]
14.05
Withstand Voltage [V]
650
SW Frequency (Max.)[kHz]
100
VCC OVP
Auto Restart
BR PIN
No
On Resistor (MOSFET)[Ω]
9.5
Channel
1
Light Load mode
Yes
EN
No
Soft Start
Yes
Thermal Shut-down
Yes
Under Voltage Lock Out
Yes
Operating Temperature (Min.)[°C]
-40
Operating Temperature (Max.)[°C]
105
Package Size [mm]
5x6.2 (t=1.71)
特点：
- PWM Current Mode Method
- Frequency Hopping Function
- Burst Operation at Light Load
- Built-in 650V Starter Circuit
- Built-in 650V Super Junction MOSFET
- VCC Pin Under Voltage Lockout Function (VCC UVLO)
- VCC Pin Over Voltage Protection Function (VCC OVP)
- Over Current Limiter Function per Cycle
- Soft Start Function
