LTR100LJZPFS
大功率贴片电阻器/长边电极型

ROHM的大功率贴片电阻器在长边方向设电极，与通用贴片电阻器相比，产品的额定功率大大提高。另外，由于电极间的距离更短，因此接合可靠性更高。

Data Sheet 购买
Data Sheet 购买

Lineup

 
* Fractions not supported (decimals only)

主要规格

 
型号 | LTR100LJZPFS
Status | 推荐品
封装 | LTR100L
包装数量 | 4000
最小独立包装数量 | 4000
包装形态 | Taping
RoHS | Yes
长期供货计划 | 10 Years

特性：

Automotive grade

Yes

Size[mm](inch)

3264(1225)

Rated Power[W]

4

Resistance Tolerance

F (±1%)

Resistance range[Ω]

11m to 18m, 20m to 47m, 51m to 91m

Resistance(Min.)[Ω]

0.011

Resistance(Max.)[Ω]

0.091

Temperature Coefficient[ppm/°C]

0 ~ 300, 0 ~ 200, 0 ~ 150

Operating Temperature[°C]

-65 to 155

Type

Wide terminal

Operating Temperature (Max.)[°C]

155

Common Standard

AEC-Q200 (Automotive Grade)

Find Similar

特点：

・大幅度提高额定功率
・在循环温度下，提高接合强度
・提高耐电涌特性。

Reference Design / Application Evaluation Kit

 
    • Reference Design - REFLD002
    • 适用于LiDAR的大功率激光二极管高速驱动EcoGaN™和高速栅极驱动器参考设计

    • LiDAR传感器不仅适用于车辆的自动驾驶应用，还适用于工业和基础设施领域的众多应用。LiDAR传感器需要具备更远的感测距离和高分辨率，不仅要提高激光二极管的特性，还需要以更快的速度和更高的功率驱动激光二极管。ROHM拥有905nm脉冲的高功率窄线宽激光二极管产品群（RLD90QZWx系列）。另外，ROHM还提供包括可高速驱动的下一代GaN器件“EcoGaN™”和用于GaN HEMT的高速栅极驱动器在内的参考设计，这将非常有助于提高LiDAR传感器的特性（距离、分辨率）。

      • Enables high-speed driving of laser diodes - a key device in LiDAR applications
      • Includes next-gen EcoGaN™ devices
      • Built-in high-speed gate driver for GaN HEMTs (BD2311NVX-C)
      • Two circuit types: square wave and resonant

    • Reference Design - REF66009
    • LogiCoA™ Solution BUCK Converter (12V Input, 5V Output, 25W)

    • LogiCoA001-EVK-001 is a reference design for a BUCK converter that uses ROHM's analog-digital fusion control technology LogiCoA™, which includes a microcontroller ML62Q2035 suitable for LogiCoA™, a 100V gate driver BD2320EFJ-LA, LDO BD950N1WG-C, BD900N1WG-C, operational amplifier BU7481SG, and shunt resistor LTR100LJZPFSR020. Design data, sample software, and an operating system for power supply control are available for this reference design, as well as a reference board. We hope that you will have a chance to experience the analog-digital fusion control LogiCoA™ and make use of it in your future power supply device development.

      Reference Program

      We offer a reference program comprising an OS for power control and firmware for BUCK converter control. Additionally, we provide a communication GUI that allows communication from a Windows PC. Please utilize these as design references. For inquiries regarding the provision of these, please contact us via the inquiry form on our website.

      • Reference Program: LogiCoA™ Solutions Buck Converter Reference Program
      • Communication GUI (Excel file): LogiCoA™ Solution Back Converter Communication GUI

X

Most Viewed