2D/3D/CAD
- HTSOP-J8 Footprint / Symbol
- HTSOP-J8 3D STEP Data
BD1LB500EFJ-C
BD1LB500EFJ-C
车载用1ch低边开关
BD1LB500EFJ-C是车载用1ch低边开关。内置过电流限制电路、热关断电路、Open检测电路、电源减压保护电路，具有异常检出时诊断输出功能。
主要规格
功能安全:
类别 : FS supportive
A product that has been developed for automotive use and is capable of supporting safety analysis with regard to the functional safety.
特性：
Grade
Automotive
Common Standard
AEC-Q100 (Automotive Grade)
Channel Number [ch]
1
Drain-Source Voltage (Max.)[V]
42.0
Output Current[A]
0.8
ON Resistance [mΩ]
350
Over Current Detect [A]
0.8
Active Clamp Energy [mJ]
25.0
Supply Voltage(Min.)[V]
3.5
Supply Voltage(Max.)[V]
5.5
Current consumption(Typ.)[µA]
500
Thermal Shut Down
Self-restart
Open Load Detect [V]
2.0
Status Terminal
Available
Junction Temperature Tj (Min.)[°C]
-40
Junction Temperature Tj (Max.)[°C]
150
特点：
- Built-in overcurrent limiting circuit
- Built-in thermal shutdown circuit (TSD)
- Built-in open load detection circuit (at output OFF)
- Enables direct control from CMOS logic ICs, etc.
- Low standby current
- Built-in under voltage lock out circuit
- Built-in diagnostic output (ST) terminal
- Low ON resistance RDS (ON) =350mΩ (Typ) (VDD=IN=5V,
- Ta=25°C, IOUT=0.25A)
- Built-in overvoltage protection (active clamp) for output circuit
- Monolithic power IC in which the control unit (CMOS) and power MOSFET are incorporated into one chip
- 1ch low side switch for driving mechanical relay coil
- AEC-Q100 Qualified
设计资源
技术记事
Schematic Design & Verification
- 功率测量中探针校正的重要性 倾斜校正篇
- 旁路电容器的阻抗特性
Thermal Design
- 使用瞬态热阻抗计算结温的方法
- 热阻、热特性参数
设计模型
2D/3D/CAD
- HTSOP-J8 Footprint / Symbol
- HTSOP-J8 3D STEP Data
封装和质量数据
Package Information
- Package Information
- Anti-Whisker formation
Manufacturing Data
- Factory Information
Environmental Data
- UL94 Flame Classifications of Mold Compound
- Compliance with the ELV directive
- REACH SVHC Non-use Declaration
- RoHS Comission Delegated Directive
Export Information
- The Export Control Order
- Export Administration Regulations(EAR)