BD00GA5MEFJ-M
面向车载设备的0.5A可变输出/固定输出LDO稳压器

BDxxGA5MEFJ-M系列是可提供0.5A输出电流的稳压器。输出精度为±1%。有可使用外接电阻在1.5V~13.0V范围内任意设置输出电压的可变型以及1.5V/1.8V/2.5V/3.0V/3.3V/5V/6V/7V/8V/9V/10V/12V固定输出型两种。封装组件采用散热性优良的HTSOP-J8。本机型内置用于防止因输出短路等发生IC破坏的过电流保护电路、关断时使电路电流为0µA的ON/OFF开关、以及防止因过负荷状态等使IC发生热破坏的温度保护电路。
另外,采用了陶瓷电容器,有助于整机的小型化和长寿化。

主要规格

 
型号 | BD00GA5MEFJ-ME2
Status | 推荐品
封装 | HTSOP-J8
包装数量 | 2500
最小独立包装数量 | 2500
包装形态 | Taping
RoHS | Yes
Functional Safety | FS supportive

特性:

Grade

Automotive

Common Standard

AEC-Q100 (Automotive Grade)

Breakdown Voltage(Max.)[V]

15.0

ch

1

Vin(Min.)[V]

4.5

Vin(Max.)[V]

14.0

Vout (Typ.) [V]

1.5 to 13

Vout Precision

±3.0%

Iout(Max.)[A]

0.5

Circuit Current[mA]

0.6

Shutdown Function

Yes

Thermal Shut-down

Yes

Over Current Protection

Yes

Over Voltage Protection

No

Discharge Function

No

Soft Start

Yes

I/O Voltage Difference (Typ.)[V]

0.6(Io=0.5A)

Ripple Rejection [dB]

60.0

Load Regulation[mV]

25(Io=0 to 500mA)

Input Capacitor[µF]

1.0

Output Capacitor[µF]

1.0

Operating Temperature (Min.)[°C]

-40

Operating Temperature (Max.)[°C]

105

特点:

・ High accuracy reference voltage circuit
・ Built-in Over Current Protection circuit (OCP)
・ Built-in Thermal Shut Down circuit (TSD)
・ With shut down switch
・ AEC-Q100 Qualified

设计资源

 

文档

Application Note

  • BDxxGA5 Series Application Information
  • BDxxGA5 Series Dropout Voltage
  • BDxxGC0, BDxxGA5, BDxxGA3, BDxxHC5, BDxxHC0,BDxxHA5, BDxxHA3, BDxxIC0, BDxxIA5 Series PCB Layout

技术记事

Schematic Design & Verification

  • 线性稳压器的基础
  • 线性稳压器的规格
  • Reverse Voltage Protection
  • Power Source ON/OFF Characteristics for Linear Regulator
  • Simple Test Method for Estimating the Stability of Linear Regulators
  • Connecting LDOs in Parallel
  • Problem Situations: Power Supply Does Not Start
  • Power Supply Sequence Circuit with General Purpose Power Supply IC
  • Table of resistance for output voltage setting on linear regulator Ics
  • Suppression Method of Switching Noise Using Linear Regulator and Low Pass Filter
  • 通过频率特性分析仪FRA测试相位余量的方法
  • Usage of SPICE Macromodel (for LDO)
  • BAxxCC0 Series Circuit Using a Ceramic Output Capacitor
  • 功率测量中探针校正的重要性 倾斜校正篇
  • 旁路电容器的阻抗特性

Thermal Design

  • Thermal Calculation for Linear Regulator
  • 热阻、热特性参数

设计模型

2D/3D/CAD

  • HTSOP-J8 Footprint / Symbol
  • HTSOP-J8 3D STEP Data

封装和质量数据

Package Information

  • Package Information
  • Anti-Whisker formation

Manufacturing Data

  • Factory Information

Environmental Data

  • UL94 Flame Classifications of Mold Compound
  • Compliance with the ELV directive
  • REACH SVHC Non-use Declaration
  • RoHS Comission Delegated Directive

Export Information

  • The Export Control Order
  • Export Administration Regulations(EAR)